RING FRAME AUDIT REPORT

RING FRAME AUDIT REPORT
	COUNT :-	DATE : -
	Machine No. :	Checked By :
Sr. No.	Observation / Checks	Remarks
1	General Cleaning	Good / Poor
2	Lubrication (Including spindle oil)	Last done on-
3	Bottom roller Greasing status
4	Vibrating spindles	SP NO -:
5	Bobbin Fit	FIXING O.K. / NOT O.K.
6	Movement of ring rail	Proper / Jerky
7	Cut lappet hooks	TOTAL NO :-
8	Jockey pulley aligment (misaligned spindles) -	SP NO :-
9	Condition of ballon control ring	Improper / Missing
10	Clearer rollers effectiveness	Proper / Always clean (not effective)
11	Diameter of Top rollers (mm)	At Present Dia :- Front -->                      Back --
12	Condition of top rollers	Good / Channeled / With cuts
13	Condition of top aprons	Good / Channeled / With cuts
14	Condition of bottom aprons	Good / Channeled / With cuts
15	Length of traverse	.....................mm
16	Absent roving guides	SP NO :-
17	Condition of gears	Perfect / Worn / Semi broken
18	Traveller clearer setting
19	Bottom roller settings (mm)	Front Zone	Back Zone
20	Top roller settings (mm)	Front Zone	Back Zone
21	Out of Position CLEARERS	SP NO :-
22	SYSTEM PRESSURE / DRAFTING PRESSURE	BAR  /                      BAR
23	SPINDLE TAPE CONDITIONS	SP NO :-
24	ADDITIONAL DRIVE VIBERATION	VIBERATION FOUND /  FOUND O.K.
25	BOTTOM ROLLER STATUS
26	BOBBIN HOLDER STATUS
27	SPACER SIZE
28	CREEL ALIGNMENT CHECKING
29	SPINDLE BRAKE MISSING	SP NO:-
30	SEPERATOR CONDITION
31	LUBRICATIING OIL PUMP WORKING
32	Main shaft bearing condition
33	Drum pulley condition
34	Jockey pulley condition
35	Head stock bearing checking
36	Pn drum cloth conition
37	Pn drum piston condition
38	Pn drum area all accessories checking condition
39	Variator belt condition
40	C1 - C2 - belt alignment checking	Alignment O.K. / Not O.K.
41	Top & bottom variator flange condition
42	Creel J - rod condition
43	Damping cylinder oil level
44	Special Observations